百川循環流水槽養殖系統,是結合工廠化循環養殖理念,集成了循環流水養魚技術與普通池塘養魚技術,將傳統池塘的“開放式散養”變為“集約化圈養”,使“靜水”池塘實現了“流水”養魚。通過機械造浪造流,在整個大池塘里形成環形水流,水流流經水槽,能在“跑道”內對水產品進行集中喂養,又能利用水流將排泄物集中到一個槽內統一處理,從而起到凈化池塘水質的作用。




循環流水槽養殖系統組成Circulation aquaculture system:
一、循環流水槽
二、氣提推水系統
三、攔網
四、底部增氧系統
五、排污系統
六、電控監測設備
七、外塘循環推水
八、應急備用設備
Circulating water channel
Two. Gas lift and push water system
Three, block the net
Four. Bottom oxygen increasing system
Five. Sewage system
Six. Electronic monitoring equipment
Seven. Circulating water in outer pond.
Eight. Emergency standby equipment
循環流水槽優勢The advantages of circulating water tank are:
一、是普通精養塘的3-6倍
二、溶氧高,實行全程監控;
三、用藥量減少80%,電耗少
四、捕撈成本低,無士腥味,肉質好;
五、餌料轉化率顯著提高;
六、養殖戶可以根據生產需要進行錯峰銷售,實現經濟效應 ;
七、集中吸污排污,實現節能減排,達到零排放。
First, 3-6 times the average intensive pond.
Two. High dissolved oxygen and full process monitoring.
Three, the dosage is reduced by 80% and the electricity consumption is low.
Four, low fishing cost, no soil smell, good meat quality;
Five. The conversion rate of feed increased significantly.
Six, farmers can sell staggering products according to production needs to achieve
economic effects.
Seven, concentrate on sewage and sewage, achieve energy saving and emission
reduction, achieve zero emissions.
循環水槽參數Circulating tank parameters:
生長周期:縮短1/3;電費:5分-1角/kg
溶氧:5mg/L以上;生產能力:3-6倍
推水流速:2-8cm/秒(變頻可調)
Growth cycle: shorten 1/3; electricity charge: 5 minutes -1 angle /kg
Dissolved oxygen: 5mg/L or more; production capacity: 3-6 times.
Water flow rate: 2-8cm/ seconds (adjustable frequency).
流水槽建造叁數Water trough construction parameters:
1.養殖區尺寸:長22米寬5米墻高2.5米
2.氣提推水區:長2米寬5米
3.集污區:長2米(1.5米下沉,下沉深0.5米)
1. the size of the breeding area: 22 meters long, 5 meters wide and 2.5 meters high.
2. air lifting and pushing water area: 2 meters long and 5 meters long.
3. collecting area: 2 meters long (1.5 meters deep, sinking 0.5 meters)